Pickering Winery SupplyOther products     About us     Contact
TANKS OAK CORKS CAPSULES CHEMICALS COATINGS

Manufacturers and Technical Consultants:
VARNI-LITE COATINGS, 21595 CURTIS STREET, HAYWARD, CA 94545

The information in this data sheet is to the best of our knowledge correct at the date of printing. The company reserves the right to modify data without notice. Any change in data will normally be followed by issue of a new data sheet. The user should check the date of printing and if more than 12 months have elapsed, then the data should only be used after checking with our nearest sales office to establish that they are still valid. Since condition of application and service may be beyond our control, no liability can be accepted on the basis of these data. Dated 10/9/00
DESCRIPTION: A premium, heavy-duty coating combining the qualities of toughness and chemical resistance with the convenience of soap and water cleanup. Features superior gloss and color retention, for outside use, it also has excellent mildew resistance.
USES:Steel gondolas, equipment, bottling room walls, conveyors, presses, tank pads, stemmer/crushers, hoists
COLOR:Available in white, gray, wine press yellow, tile red and black
COVERAGE:400 square feet per gallon. Depends on porosity of surface.
FINISH:Gloss.
VISCOSITY:Thin liquid.
DRYING TIME:Set to touch 15-30 minutes, recoat 2-4 hours.
THINNER:Water.
SURFACE PREPARATION:Surface should be clean and free of loose paint, etc. Since it contains non-toxic corrosive inhibitors, it can be self priming.
APPLICATION:Apply by means of brush, roller or spray.
RESISTS:Wine acids, caustic, alcohol. Good toughness.
CAUTION:Do not apply when air temperature is below 60° F. Store in warm room. Do not spray in confined area without proper ventilation and respirator. This is an industrial product. Keep out of reach of children. Use in well ventilated area.